There’s a lot more to a vehicle lift than the weight it can handle. The design itself makes a difference to how your teams work, and how easily they can service your vehicles.

So before you commit to one or the other, you need to know the differences that matter - so you can choose the right kit to match what you need.

Here are the big differences when you’re comparing a two post vs four post lift:

1. Saving space

No matter what size your workshop, space is always a priority. That means any space-saving gains can have an impact on your productivity and throughput.

Because a four post lift is designed with a rectangular frame (with a lifting column on each corner), it’s always going to occupy a space that’s about the size of your vehicles. 

With a two post lift, things are a little different. Because it uses two lifting columns near the centre of the vehicle, the lift can be much shorter (front-to-back) than the vehicle itself. Without a four post frame to box in the space, you can reclaim some floorspace when you’re not using the lift.

It’s not permanent, of course: that extra space will be taken up by the vehicle whenever the lift is in use. But even temporary space can be useful in a tight and busy workshop.

That could mean freeing up floor space for:

• More convenient walking routes for your teams as they travel around
  
• Setting up small, temporary workstations
  
• Short-term storage space for smaller items
  

So if you’re running a smaller workshop where space is tight - and especially if you have periods where the lift won’t be in use - a two post lift might be the best fit for saving space.

2. Underside access

For most workshops, this is the biggest difference in practical terms.

Because a four post lift uses drive-on platforms to lift from the wheels, those wheels are taking the weight of the vehicle - so you won’t be able to work on them. But that also means the chassis is completely unobstructed, giving your teams full access to the underside components and systems.

While that sounds like a problem, there’s a solution that gives you wheel access with a four post lift: with a jacking beam as an add-on attached to your lift, you can raise the vehicle a second time from its raised position on the lift. The jacking beam takes the weight of the vehicle, and the wheels become free and accessible - so your teams can service the wheels without the time and hassle of lowering the lift and repositioning the vehicle.

With a two post lift, things are a little different: most two post lifts attach near the centre of the vehicle (at the manufacturer’s recommended lifting points). That means the wheels are completely free and accessible, so your teams can work on the wheel systems without lowering the vehicle.

But it also means that some parts of the chassis won’t be accessible while the vehicle’s raised. Any underside components and systems that are close to the lifting points will be at least partly obstructed by the lifting arms - which means some jobs could be impossible while the vehicle’s raised.

3. Setup and positioning

Speed and efficiency are important with any vehicle servicing. But as well as the time spent on the job itself, the preparation and setup can be just as important.

With a four post lift, you’re lifting from the wheels on platforms. That usually means a drive-on loading system using ramps.

Your staff can simply drive the vehicle onto the lift, and it’s already in position and ready to go. That can be a huge time-saver for busy teams, and the simplicity of it could help to reduce the chances of mistakes or poor positioning.

With a two post lift, things are a little more complex.

Once the vehicle’s in position, you need to attach the lifting arms to specific parts of the vehicle chassis. That can make positioning the vehicle more tricky, and it can mean extra time getting the arms in the right place and checking they’re securely attached.

For the busiest workshops with high demand and throughput - where every second counts towards efficiency - a four post lift could be the fastest and simplest choice.

So which is it?

There’s no simple answer when you’re comparing two post vs four post lifts. They’ve each got their features that work for different needs - from space-saving and wheel access to the speed of setup and loading. So if you’re looking for a new lift and you’re still not sure, we’re here to help.