As the pandemic ebbs and flows around us and we are being encouraged to wear face masks and keep our distance, the world is looking unfamiliar and people isolated through not having friends and colleagues around them. We have to get used to a new normal but how that is going be is to a great extent up to us all.

For example if we need to stay in a hotel, we want to know that the room we booked has been cleaned thoroughly between guests. Now it is not enough to presume cleanliness it needs to be demonstrable. The same goes for meeting rooms, kitchens even shared working space or vehicles.

To this end tamper evident labels, security stickers - whatever you call them can play a very handy role in your sanitisation regime, providing visual assurance that the space you are about to occupy has been thoroughly sanitised between users.

Conventional security seals require a latch or eyelet to seal through and in normal circumstances the meeting room door, kitchen or cab of a van may have a lock but any seal will need to be surface mounted, peelable and leaving no unsightly residue.

Non-residue void labels were developed for the use of airlines on aircraft doors and hatches. Aircraft are streamlined and anything creating turbulence or drag is anathema but reuse must be prevented. Unisto’s tamper evident labels securely void, preventing reuse and leaving no residue behind when removed. The seals are serial numbered so providing an audit trail enabling users and management to record their activities and demonstrate they have taken care. As we know these days it is not sufficient to have done a great job, you have to record your activity and be able to prove it. The seal can be colour coded for reassurance, green for GO for example and some reassuring wording.

In the transport arena there are several traditional areas where tamper evident labels can be effective. Van doors normally have no latches to seal, they may well have locks but as we know locks are unreliable security devices, they can be picked or just opened with a duplicate key, goods removed and relocked leaving no trace of evidence. Using a security Non-Resi void label provides the evidence of opening. Now the cab between drivers will need to be cleaned and sanitised from a health and safety perspective and a tamper evident label can be used to reassure the next driver.

These days fully integrated label production equipment allows full colour print, Unisto can provide images such as logos and photographs reproduced either in batches or as individual images within a production run. This individualisation combined with sequential numbering, barcode and a strong void message when removed gives a level of security and assurance that was previously impossible.

Other items that require sealing are drivers’ boxes, first aid and ADR kits to ensure that a fully compliant and complete kit is handed over to the driver by the transport office team.

Many logistics firms now require visitors to distribution centres undertaking sensitive work for clients to disable photographic equipment on mobile phones and laptop computers, a tamper evident non-residue leaving void label is a very effective method to cover smartphone cameras. The number on the label can be linked to the visitor badge ensuring traceability.

Residue leaving labels such as De-Lam, Destruct-A-Seal, and MultiSeal are ideal for transit packaging such as cardboard cartons and consumer packaging.

Each type of label has specific properties that make it suitable for particular applications to provide a range of benefits.

All self-adhesive materials are only as effective as the surface they are applied to. The surface condition needs be considered, roughness, smoothness, porosity, coated, uncoated, cleanliness, flexibility, temperature conditions, wet or dry, and finally, surface energy. Unisto appreciate this and produce a range of security label and tape solutions using a broad range of adhesives, inks and films to ensure the best possible solution for the application in hand.

All surfaces have energy associated with them, because work is needed to form them. These are the forces that are required to hold the molecules together to form the surface, whether it’s a desk top or a cardboard box. These surfaces are referred to as either low energy or high energy.

Low energy surfaces for example acrylic, plastics, rubber and composites. These surfaces are harder for labels and tapes to stick to.

High energy surfaces for example glass and car paint are easier for labels and tapes to adhere to.

To understand the surface energy of a product it is easy to perform a simple experiment using a drop of water. Surfaces can be Hydrophobic (hate water) or Hydrophilic (love water).

Low surface energy Hydrophobic surfaces repel the water so the droplets sit proud on the surface in a high dome, whereas on high surface energy hydrophilic surfaces the droplet sits lower and flatter.

Low surface energy = poor adhesion properties

High surface energy = good adhesion properties

Whilst security labels are sometimes considered to be secondary to thermo-plastic and metal security seals, advances in adhesive technology have made them an excellent all-round solution that provides quick, neat and convenient tamper evident security to the otherwise unsecureable.

For more information, please visit www.unisto.co.uk

Residue leaving labels:

De-Lam Seal

Lamination destroys the surface finish preventing reuse & providing tamper evidence.

Most suitable for:

Consumer packaging

Cardboard cartons

Low cost tamper evident solution

Destruct-A-Seal

Frangible material removes with difficulty in small fragments preventing reuse and providing tamper evidence.

Most suitable for:

Consumer packaging

Cardboard cartons

2 Part Multi-Seal

Voiding material leaving a tough-to remove “VOID” residue message.

Most suitable for:

High value consumer goods packaging

Gloss laminated cartons

One-way packaging

Carrier bags

Envelopes

Sample packs

Colour Change 2 Part Multi-Seal

Voiding material leaving a tough-to remove contrast colour“VOID” residue message.

Most suitable for:

High value consumer goods packaging

Gloss laminated cartons

One-way packaging

Carrier bags

Envelopes

Sample packs

Residue leaving labels & tapes:

Stab Seal

Voiding material leaving a tough-to remove silver ‘VOID’ residue.

Most suitable for:

High-value consumer goods packaging

Securing industrial component packaging

Gloss laminated cartons.

One-way packaging

Document envelopes

Sample bags

Serial Void DR4028 “UNISTO”

Voiding material leaving a tough-to remove red ‘UNISTO VOID OPENED’ residue. On reels without backing tape, sub-surface printed with unique serial number.

Most suitable for:

Industrial component packaging

Cartons

Polybags

Single use packaging

Void Tape DR322 “SECURITY”

Printed voiding 2” tape leaving a tough-to remove blue ‘VOID OPENED’ residue.  On reels of 50 meters without backing tape.

Most suitable for:

Industrial component packaging

Cartons

Polybags

Single use packaging

Plain Void Tape

Voiding 2” tape leaving a tough-to-remove blue ‘VOID OPENED’ residue.  On reels of 50 meters without backing tape.

Most suitable for:

Industrial component packaging

Cartons

Polybags

Single use packaging

Non-residue leaving labels:

Camera Void Seal

Voiding label leaving no residue on the surface of the substrate that has been sealed but a strong ‘VOID’ through the label itself.

Most suitable for:

Data/IP/know-how protection

Manages & records visitors smartphones on site

Simple to fit easy to remove

Leaves no residue on the lens

Non-Resi Plus Seal

Voiding label with additional grab leaving no residue on the surface of the substrate that has been sealed but a strong ‘VOID’ through the label itself.

Most suitable for:

Vehicle doors

Aircraft bins and hatches

Reusable packaging

Data cabinets

Filing cabinets & desk drawers

Non-Resi Plus Digiprint Seal

Voiding label with additional grab leaving no residue on the surface of the substrate that has been sealed but a strong ‘VOID’ through the label itself. Can be printed with high definition digital images, micro printing, serial number & barcode.

Most suitable for:

Personnel ID

Branded security labels

No Return label for clothing retailers

Data control

Guarantee validation

Non-Resi Covid-19 “sanitised” Label

Voiding label with additional grab leaving no residue on the surface of the door that has been sealed but a strong ‘VOID’ through the label itself. Security kiss cuts through the centre designed to lay across the door gap for ease of opening but not allow label reuse.

Most suitable for:

Health and Safety seal

Facilities management & control

Hotel housekeeping management

Auditable

Employee/guest reassurance